ดอกเจียร์คาร์ไบด์
คุณสมบัติสินค้า:
SKU : YORK
ดอกเจียร์คาร์ไบด์ Conical - CUT 9 มีหลายขนาดและรูปแบบให้เลือก
Share
CONICAL CARBIDE BURR DBL CUT
Conical All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.
Cut Numbers:
Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Please note:
Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ORDER CODE : YRK-210-8649K
- Cut 9 - Chipbreaker
- Conical 60° Inc. Angle
- Head Size (R x L) : 10 x 8 mm
ORDER CODE : YRK-210-8669K
- Cut 9 - Chipbreaker
- Conical 60° Inc. Angle
- Head Size (R x L) : 16 x 14 mm
ORDER CODE : YRK-210-8919K
- Cut 9 - Chipbreaker
- Conical 90° Inc. Angle
- Head Size (R x L) : 6 x 3 mm
ORDER CODE : YRK-210-8939K
- Cut 9 - Chipbreaker
- Conical 90° Inc. Angle
- Head Size (R x L) : 10 x 5 mm
ORDER CODE : YRK-210-8959K
- Cut 9 - Chipbreaker
- Conical 90° Inc. Angle
- Head Size (R x L) : 12.7 x 6.3 mm
ORDER CODE : YRK-210-9329K
- Cut 9 - Chipbreaker
- Inverted Cone
- Head Size (R x L) : 12.7 x 12.7 mm
ORDER CODE : YRK-210-9489K
- Cut 9 - Chipbreaker
- Inverted Cone
- Head Size (R x L) : 19 x 16 mm
** สินค้าจริงอาจแตกต่างจากภาพในหน้าจอ เนื่องจากการจัดแสงในการถ่ายภาพ การแสดงผลของหน้าจอ และการผลิตในแต่ละล็อต ทางบริษัทฯขอสงวนสิทธิ์ไม่รับเปลี่ยน/คืนสินค้า **
