สินค้า KENNEDY


 

รวมครบสินค้าคุณภาพ

สามารถเลือกสินค้าจากหมวดหมู่สินค้าได้ที่เมนู หมวดหมู่สินค้า ทั้งเครื่องมือช่าง เครื่องมือลม เครื่องมือไฟฟ้า เครื่องมือไฮดรอลิค คีมย้ำหางปลา คีมย้ำไฮดรอลิค เครื่องมืออัดจารบี เครื่องมือวัดละเอียด เครื่องมือวัดภาคสนาม เครื่องมือก่อสร้าง รอกโซ่ รอกโยก รอกถ่วง เครื่องมือเอนกประสงค์ แม่แรงกระปุก เครื่องสูบน้ำ ตู้เครื่องมือ กล่องเครื่องมือ ปั๊มลม เครื่องมือทำความสะอาด บันไดอุตสาหกรรม รถเข็นอุตสาหกรรม เครื่องมือทำความสะอาด น้ำยาเคมี น้ำยาทำความสะอาด เครื่องต๊าปเกลียว เครื่องเชื่อม ตู้เชื่อมไฟฟ้า อุปกรณ์เซฟตี้ ปลั๊กไฟ ล้อเก็บสายไฟ ดอกสว่าน ดอกเจาะ ดอกกัด ดอกเจียร์ แผ่นตัด แผ่นเจียร์ แบรนด์ชั้นนำระดับโลก


 

** กรุณาคลิกสินค้าเพื่อดูรายละเอียด และรหัสการสั่งซื้อ **

** คลิกที่นี่เพื่อเลือกสินค้าจากแผนที่สินค้า **

KENNEDY : เครื่องมือเวิร์คช็อป WORKSHOP TOOLS

Hardened and tempered jaws with spring tension clips.

KENNEDY : เครื่องมือเวิร์คช็อป WORKSHOP TOOLS

For holding small drills in lathes and larger chucks. With three collets.

KENNEDY : เครื่องมือเวิร์คช็อป WORKSHOP TOOLS(copy

Pin Vice Set Capacity: 0.0 - 4.8mm. Manufactured from hardened steel. Ideal for holding drills, small files and wire. The through hole construction of the body allows lengths of wire to be held.

KENNEDY : เครื่องมือช่าง

Manufactured from hardened steel. Ideal for holding drills, small files and wire. The through hole construction of the body allows lengths of wire to be held.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Designed for use in automotive and engineering applications. Ideal for use in the removal of O-rings, cotter pins, seals, bushes, springs and washers. Impact resistant handles. Presented in sturdy blow moulded plastic case. Contents; 210mm (8") hook tip, straight tip, 90° tip 135mm (5") straight tip, hook tip, combination tip, 90° tip.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Includes straight pick, full hook, 90° hook and 45° hook. Ideal for use on cotter pins, keys, ‘O’ rings, springs and washers. Hardened and tempered chrome vanadium steel shanks with a knurled section for precise grip. Impact resistant square section handles for secure grip even when greasy. Overall length: 120 - 130mm (4 3/4” - 5 1/8”).

KENNEDY : เครื่องมือช่าง HANDTOOLS

3 Piece Set 100mm three square, half round and 205mm flat. All have wooden contoured handles with high grade steel blades which are hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots by removing minute amounts of metal from a surface which has been previously machined or filed.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Flat For use on flat surfaces and external cylindrical surfaces. Wooden contoured handles with high grade steel blades, hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots from a surface which has been previously machined or filed.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Half Round For use on hollow surfaces such as bearing linings and internal cylindrical surfaces. Wooden contoured handles with high grade steel blades, hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots from a surface which has been previously machined or filed.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Three Square. Suitable for tool room and light engineering work. Used on small bearings and bushes and into restricted/tight angles. Wooden contoured handles with high grade steel blades, hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots from a surface which has been previously machined or filed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

All steel drop forged solid construction for long life with knurled handles for extra grip. Designed to hold a range of different sizes of round split-adjustable dies. The three screw design easily locks die into position and maintains alignment for accurate threading resulting in clean, straight threads. Die Stock Set Contents: 1 - 13/16” x 150mm, 1 - 1” x 210mm, 1 - 15/16” x 280mm.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

All steel drop forged solid construction for long life with knurled handles for extra grip. Designed to hold a range of different sizes of round split-adjustable dies. The three screw design easily locks die into position and maintains alignment for accurate threading resulting in clean, straight threads.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Manufactured from hardened and tempered steel, with chrome plated high polish finish. Switchable between forward and reverse coupled with the multi-positional sliding T-bar makes this tap wrench ideal for use in confined spaces. Individually boxed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Contents Diestocks: 1” x 13/16”,1” x 1”, 1” x 15/16”. Tap wrenches (square size): 1 x 2.8 - 5.0mm and 1 x 4.0 - 10.0mm.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Ductile steel body with a knurled locking nut ensuring no loss of grip during use.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529. Tap Wrench Set Contents: Square size: 2.8 - 5mm and 4.0 - 12mm.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

English Type Contents: Standard length 2.0 - 2.8, 3.0 - 5.0, 7.0 - 9.4mm. Extra length 3.0 - 5.0, 7.2 - 9.0mm.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.

KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.

KENNEDY : เครื่องมือช่าง HANDTOOLS

For marking and scribing in hard and soft materials including steel, plastics and timber. Overall length: 180mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

For marking, scoring and identification on hard and soft materials including alloy, copper, stainless steel, glass and ceramics. Overall length: 180mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Double ended, ideal for marking out in hard to get places eg. grooves. Overall length: 180mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Double ended, ideal for marking out in hard to get places eg. grooves. Overall length: 180mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. One piece single ended for marking out in confined places. Overall length: 115mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Pocket Scriber With steel tip only, also a reversible point to prevent snagging of clothing when clipped into pocket. With knurled bodies for extra grip. Overall length: 88mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS

4 prong steel retractable claw. Flexible steel stem with a spring loaded plunger to open and close jaws. Chrome plated and corrosion-resistant. Ideal for recovery of small objects.

KENNEDY : เครื่องมือช่าง

Manufactured from shock resistant plastic. Shatterproof lens. Ideal for jewellers, watchmakers, electronics and model makers.

KENNEDY : เครื่องมือช่าง

Manufactured from shock resistant plastic. Shatterproof lens. Ideal for jewellers, watchmakers, electronics and model makers.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Consists of a chuck body and four contact arms. Designed to check 'run-out' or concentricity, straightness and alignment. Will indicate the position of a datum point on a component or fixture from the centre line of a machine spindle. Suitable for use on drill presses, lathes, milling machines, borers etc. Contents: Chuck Body, Universal Indicator Holder, Needle Point, Ball Contact, Disc Contact.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. Taper Punch Set Contents: 1x 3, 4, 5, and 6mm.

KENNEDY : เครื่องมือช่าง HANDTOOLS(copy)

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.

KENNEDY : เครื่องมือช่าง HANDTOOLS

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. Supplied in plastic wallet. Contents: 4.0, 4.8, 5.5 & 6.4

KENNEDY : เครื่องมือช่าง HANDTOOLS(copy)

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. Contents 2.4, 3.2, 4.0, 4.8, 5.5 & 6.4mm.