KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
2.8-5.0mm, 4.0-10.0mm, 4.0-12.0mm, 5.3-17.0mm With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
3.0-3.9mm, 5.6-6.2mm Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
4.0-5.0mm, 4.0-5.5mm Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
Used in Hand Tapping operations and provide the reach and leverage needed for accurate tapping. Heavy duty ductile steel body with knurled chuck, stepped chuck jaws and four point clamping increase the range of tap sizes which can be used in the wrench fitted with a fixed T-bar. Individually boxed.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
English Type Contents: Standard length 2.0 - 2.8, 3.0 - 5.0, 7.0 - 9.4mm. Extra length 3.0 - 5.0, 7.2 - 9.0mm.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
3.0-5.0mm, 7.2-9.0mm Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.
ขายแล้ว 0 ชิ้น
KENNEDY : ดอกต๊าป ดายต๊าป ด้ามต๊าป TAP & DIE
Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-4220K, KEN-518-4240K
For marking and scribing in hard and soft materials including steel, plastics and timber. Overall length: 180mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-4200K
For marking, scoring and identification on hard and soft materials including alloy, copper, stainless steel, glass and ceramics. Overall length: 180mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-4360K
Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Double ended, ideal for marking out in hard to get places eg. grooves. Overall length: 180mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Double ended, ideal for marking out in hard to get places eg. grooves. Overall length: 180mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-4350K
Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. One piece single ended for marking out in confined places. Overall length: 115mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's standard type, double ended, which are mainly used in conjunction with surface gauges. Pocket Scriber With steel tip only, also a reversible point to prevent snagging of clothing when clipped into pocket. With knurled bodies for extra grip. Overall length: 88mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
4 prong steel retractable claw. Flexible steel stem with a spring loaded plunger to open and close jaws. Chrome plated and corrosion-resistant. Ideal for recovery of small objects.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง KEN-518-5290K
Manufactured from shock resistant plastic. Shatterproof lens. Ideal for jewellers, watchmakers, electronics and model makers.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง
Manufactured from shock resistant plastic. Shatterproof lens. Ideal for jewellers, watchmakers, electronics and model makers.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1500K
Consists of a chuck body and four contact arms. Designed to check 'run-out' or concentricity, straightness and alignment. Will indicate the position of a datum point on a component or fixture from the centre line of a machine spindle. Suitable for use on drill presses, lathes, milling machines, borers etc. Contents: Chuck Body, Universal Indicator Holder, Needle Point, Ball Contact, Disc Contact.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1460K
Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
0.375", 10mm, 0.500" BODY Cylinder Type For fast accurate work location. Made from tool steel and hardened all over, they can be used on flat surfaces, straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1550K
Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. Taper Punch Set Contents: 1x 3, 4, 5, and 6mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. Supplied in plastic wallet. Contents: 4.0, 4.8, 5.5 & 6.4
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. Contents 2.4, 3.2, 4.0, 4.8, 5.5 & 6.4mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. 130x8.8mm(11/32")
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. 115x5.5mm(7/32"), 115x6.3mm(1/4"), 115x7.8mm(5/16")
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066 100x1.9mm(5/64"), 100x2.4m(3/32"), 100x3.2mm(1/8"), 100x3.4mm(9/64"), 100x4.0mm(5/32"), 100x4.8mm(3/16"),
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Supplied in hardwearing PVC pocket wallets with tie fastening. Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Supplied in hardwearing PVC pocket wallets with tie fastening. Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2330K
Long Parallel Punch Set Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
3mm, 4mm, 5mm, 6mm, 8mm Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2435K
Manufactured from chrome vanadium steel. Used for punching out pins and dowels. Set - Supplied in plastic wallet. Contents: 2, 3, 4, 5, 6 and 8mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, Manufactured from chrome vanadium steel. Used for punching out pins and dowels.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-1593K, KEN-518-1596K
For a variety of soft materials. Can be used for cutting holes and producing clean edged discs from the material being cut.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2331K
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Made from chrome vanadium steel with high strength octagonal shanks and featuring cushioned grip handles with shock absorbing air pockets. Overall length: 150mm (6"). Sizes include (Diameter x Length) 2mm x 150mm 3mm x 150mm 4mm x 150mm 5mm x 150mm 6mm x 150mm 8mm x 150mm
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Made from chrome vanadium steel with high strength octagonal shanks and featuring cushioned grip handles with shock absorbing air pockets. Overall length: 150mm (6"). 150x2mm, 150x3mm, 150x4mm, 150x5mm, 150x6mm, 150x8mm,
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS KEN-518-2300K
Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip. Conform to BS 3066. (Hardness: heads 42 HRC. Max: points 52 - 58 HRC). Overall length: 100mm (4”). Set - Supplied in plastic wallet. Contents: 1.6, 2.4, 3.2 and 4mm.
ขายแล้ว 0 ชิ้น
KENNEDY : เครื่องมือช่าง HANDTOOLS
Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip. Conform to BS 3066. (Hardness: heads 42 HRC. Max: points 52 - 58 HRC). Overall length: 100mm (4"). 100x1.6mm, 100x2.4mm, 100x3.2mm, 100x4.0mm,
ขายแล้ว 0 ชิ้น